Thread: Chevrolet Camaro Stage 1 Turbo System
View Single Post
Tweet this Post!   #23 (permalink)  
Old 06-02-2010, 10:05 AM
Robert's Avatar
Robert Robert is offline
Administrator
Turbonetics Owners Club Staff
  
Join Date: Jun 2006
Location: Socal
Posts: 4,391
Send a message via AIM to Robert Send a message via Yahoo to Robert
Default
So just a few updates that I got from Turboentics on the kit they have been working on. Turbonetics for now is going with a 72mm compressor instead of the 61mm they were going to use before. The 72mm compressor is good for 850 CHP of air which is quite a bit higher than the 61mm. Turbonetics is mocking up the 72mm on a Camaro they just bought. The 72mm is what they are using now but it may change later from what I'm told. Pictures of the current mockup 72mm below:





__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804

2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
Reply With Quote