Quote:
|
Originally Posted by Neonkev
im stumped on the install the raptor BOV as 2 holes on the back of it how many do i use for my SRT-4 srtforums says only one but thought id ask the makers who can enlighten me here lol instructions would be hella sweet ><
|
You do in fact only use one. You should be routing your boost signal line to the TOP port of the BOV CLOSEST to the RED TURBONETICS LOGO AT THE TOP. I say that in caps not to be mean or anything just that depnding on some peoples system their BOV is upside down or sideways and it can become very confusing. The upper port needs to see boost pressure under load and the tranistion to vacuum when you lift the thottle.