[vrboy]

Hi there guys! I'm raymund from canada. My friend gave me an old T04b turbonetics turbo. I'm planning to have it rebuilt by turbonetics and if possible upgrade it before i bolt it up on my 2nd generation 4G63T. To be honest with you, i'm still a newbie when it comes to tunning and i need all the knowledge i can get for me me to et it right. Here are the specs of the turbo.

compressor housing = t04b(20202 S) 2.75 inlet, 2.0 outlet
compressor wheel inducer = 45 mm
compressor wheel exducer = 76 mm
turbine housing = T3 5 bolt .63 AR
turbine wheel = stage 1

How many horses can i get from it?
Is advisable to have it rebuit or just buy a new unit?


Thank you in advance guys! I would really appreciate you help.

[Robert]

Originally Posted by vrboy

Hi there guys! I'm raymund from canada. My friend gave me an old T04b turbonetics turbo. I'm planning to have it rebuilt by turbonetics and if possible upgrade it before i bolt it up on my 2nd generation 4G63T. To be honest with you, i'm still a newbie when it comes to tunning and i need all the knowledge i can get for me me to et it right. Here are the specs of the turbo.

compressor housing = t04b(20202 S) 2.75 inlet, 2.0 outlet
compressor wheel inducer = 45 mm
compressor wheel exducer = 76 mm
turbine housing = T3 5 bolt .63 AR
turbine wheel = stage 1

How many horses can i get from it?
Is advisable to have it rebuit or just buy a new unit?


Thank you in advance guys! I would really appreciate you help.

Well first that turbo might have the old standard shaft not the big shaft. Turbonetics no longer has parts for standard shaft turbos so you might not even be able to rebuild it. That being said the t3 Stage 1 turbine is fairly small. What power were you looking to make?

[vrboy]

Thanks for the reply robert! So i guess the turbo is gonna be a good paper weight now. I'm hoping to make 350 whp. What turbo can you suggest? Thanks again!

[Robert]

Originally Posted by vrboy

Thanks for the reply robert! So i guess the turbo is gonna be a good paper weight now. I'm hoping to make 350 whp. What turbo can you suggest? Thanks again!

Well for 350 WHP a GT-K 350 would do the trick. Its a T04E 50 trim compressor with an F1 T3 Stage 2 turbine wheel that includes a ported compressor shroud and a ceramic coated turbine housing.

[vrboy]

Thanks Robert! i guess i better start saving up now.

[Robert]

Originally Posted by vrboy

Thanks Robert! i guess i better start saving up now.

No problem glad to help out.