| Tech Support Got a question about a Turbonetics product...here's the place to ask it. |
 |
10-21-2010, 02:36 PM
|
|
Newbie
|
|
Join Date: Oct 2010
Posts: 4
|
|
Turbo id
I have a turboontics that goes to a 86-87 grand national I was wondering if it is a stock replacement or a cheetah 3 It has a 2.75 inlet 2.00 outlet compressor 2.25 minor 2.75 major has the .82 3 bolt exhaust housing and the water and oil center section what kind of hp will this make TIA
|
10-25-2010, 08:49 AM
|
 |
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Quote:
Originally Posted by 2fast4u
I have a turboontics that goes to a 86-87 grand national I was wondering if it is a stock replacement or a cheetah 3 It has a 2.75 inlet 2.00 outlet compressor 2.25 minor 2.75 major has the .82 3 bolt exhaust housing and the water and oil center section what kind of hp will this make TIA
|
I'm not aware of and not seeing any 2.75" major compressors. I'm not sure what you have there. Can you post some pictures?
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
10-25-2010, 01:03 PM
|
|
Newbie
|
|
Join Date: Oct 2010
Posts: 4
|
|
size
I will try to get some pictures in mm.minor 56mm major 70mm??
|
10-25-2010, 01:24 PM
|
|
Newbie
|
|
Join Date: Oct 2010
Posts: 4
|
|
pictures
here are some pictures 182.jpg (93.4 KB)
181.jpg (96.4 KB)
180.jpg (86.3 KB
|
10-25-2010, 02:55 PM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Quote:
Originally Posted by 2fast4u
here are some pictures 182.jpg (93.4 KB)
181.jpg (96.4 KB)
180.jpg (86.3 KB
|
That looks like a Turbonetics compressor and turbine housing but the CHRA and backplate don't look like Turbonetics units. If they are they are extremely old and it's likely that compressor wheel was discontinued long ago. I've looked through the oldest list of turbo sizes I have and I don't see anything with a 2.75" major diameter.
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
10-25-2010, 04:08 PM
|
|
Newbie
|
|
Join Date: Oct 2010
Posts: 4
|
|
turbo
exhaust wheel 2.00 minor 2.90 major. the major on the comp may have been a little closer to 2.91 if that qualifies for 3.00 doesn't look like the wheel has come in contact with the housing. there is no shaft play I didn't know if the smaller comp.wheel would offset the .82 exhaust and spool quickly or have lag i have a te44 i am running now but has a lot of side to side shaft play and a rebuilt kit will not correct the problem (center housing wore) So i'm trying to get a idea of hp that i might get.fall test and tune starts and I don't want to put it on and embarrass myself lol
|
10-25-2010, 04:21 PM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Quote:
Originally Posted by 2fast4u
exhaust wheel 2.00 minor 2.90 major. the major on the comp may have been a little closer to 2.91 if that qualifies for 3.00 doesn't look like the wheel has come in contact with the housing. there is no shaft play I didn't know if the smaller comp.wheel would offset the .82 exhaust and spool quickly or have lag i have a te44 i am running now but has a lot of side to side shaft play and a rebuilt kit will not correct the problem (center housing wore) So i'm trying to get a idea of hp that i might get.fall test and tune starts and I don't want to put it on and embarrass myself lol
|
Well, here are the current Grand National turbos available. It's possible this is an older model that I just don't have measurements for anymore but i have some pretty old catalogs and I'm just not seeing anything that matches up well. The closest thing I can find would be the T04B Super H compressor which would line up with the Cheetah 3. Measurements for that compressor should be:
Inducer Major Inlet
SUPER-H 20288T 2.298 3.000 2.75'' 20192 3.0'' 20192-3
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -7. The time now is 11:16 AM.
Powered by vBulletin® Version 3.8.2 Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.0
|
