| Tech Support Got a question about a Turbonetics product...here's the place to ask it. |
[SOLVED] Where to get REBUILD KIT & HELP ID my Turbonetics with pics
11-08-2011, 09:12 AM
|
|
Newbie
|
|
Join Date: Nov 2011
Posts: 2
|
|
Where to get REBUILD KIT & HELP ID my Turbonetics with pics
Hi, ive got this turbo some time ago (like 5-6 years ago) along with the full turbo kit for 93-01 Nissan Altima, from turbokits.com!!!!
There is no tag on this turbo, may be it fell off, car is used as a daily driver, turbo put on around 60-80k Kmtrs!! (because waste gate pressure - 8-9psi and no boost controller, so turbo never work hard)
If your not able to figure out what turbo is this, i can probably take it off and make some perticular areas pictures, but rather not because im using a car! If you need measurments i can provide them as well!
WHY: some time ago turbine started to smoke after cold start and if not driven, if the car justs sits idling it could smoke all day! As soon as i drive smoke whent away!!!! Now have huge shaft play, almost touching the housing!
LOOKING FOR: some distributor that can sell me the kit to rebuild it!!! Basically both bearings and a thrust washer! DOING it myself!
The things i know:
T3 flange, .63ar, pretty shure its not balbearing, heres pics:
|
11-15-2011, 02:42 PM
|
 |
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Quote:
Originally Posted by tryingtobebest
Hi, ive got this turbo some time ago (like 5-6 years ago) along with the full turbo kit for 93-01 Nissan Altima, from turbokits.com!!!!
There is no tag on this turbo, may be it fell off, car is used as a daily driver, turbo put on around 60-80k Kmtrs!! (because waste gate pressure - 8-9psi and no boost controller, so turbo never work hard)
If your not able to figure out what turbo is this, i can probably take it off and make some perticular areas pictures, but rather not because im using a car! If you need measurments i can provide them as well!
WHY: some time ago turbine started to smoke after cold start and if not driven, if the car justs sits idling it could smoke all day! As soon as i drive smoke whent away!!!! Now have huge shaft play, almost touching the housing!
LOOKING FOR: some distributor that can sell me the kit to rebuild it!!! Basically both bearings and a thrust washer! DOING it myself!
The things i know:
T3 flange, .63ar, pretty shure its not balbearing, heres pics:
|
You'd need to pull the wheel measurements of the unit to tell me what it is but first measure the shaft size. If the shaft isn't 5/16" its a small shaft and there aren't any parts for it. If its a big shaft and non-ball bearing there's a rebuilt kit available on the store. If its a ball bearing big shaft Turbonetics would have to rebuild the unit in house.
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
12-14-2011, 02:51 PM
|
|
Newbie
|
|
Join Date: Nov 2011
Posts: 2
|
|
Hey, i have more info now!
The number on the turbo is:
T-12558
Compresor small side ~ 56mm, large ~ 70mm
Turbine small ~56mm, Large ~64.90
Shaft is 3 stages, from large(Turbine side) to small : 10.15mm, 8mm, 6.33mm
Here are some pics:
here is the FREE beaing i received from local turbo rebuild shop!)))) my old one on the right
Oh, and i forget to mension that this turbocharger has middle ball bearing
|
12-19-2011, 10:20 AM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Quote:
Originally Posted by tryingtobebest
Hey, i have more info now!
The number on the turbo is:
T-12558
Compresor small side ~ 56mm, large ~ 70mm
Turbine small ~56mm, Large ~64.90
Shaft is 3 stages, from large(Turbine side) to small : 10.15mm, 8mm, 6.33mm
Here are some pics:
here is the FREE beaing i received from local turbo rebuild shop!)))) my old one on the right
Oh, and i forget to mension that this turbocharger has middle ball bearing
|
Looks like a T04E 57 trim with a T3 Stage 3 turbine.
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
12-20-2011, 10:20 AM
|
|
Turbonetics Enthusiast
|
|
Join Date: Jun 2006
Location: Canton, CT
Posts: 95
|
|
Hello tryingtobebest, let us know if you need any help 
|
 |
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -7. The time now is 12:38 PM.
Powered by vBulletin® Version 3.8.2 Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.0
|
