Cams do work well with 350Z Single Turbo

ZMedic · Tweet this Post! #1 (**permalink**) 12-21-2006, 05:35 PM

I can vouch for the effectiveness of cams with the single turbo.
I just sucessfully had installed a set of JWT S1 cams into my 2003 350Z Turbonetics powered Z with (As Borat would say...) GRRREAT SUCCESS!!!

Previously to the cams I was at a comfortable, but somewhat dissappointing 350rwhp and 390 ft lb torque. That again is with a Tuner Turbo kit. UTEC, 440cc's, Crawford Plenum, Fuel Return, Walbro.

Now after just 2 mods...Single exhaust and JWT Cams...well...I'll let the numbers speak for themselves.

Well 401 RWHP is +51 and 402 ft lb is +12 so I say its a win win situation.

What do you think?

ZMedic · Tweet this Post! #2 (**permalink**) 12-21-2006, 05:37 PM

Stay away from JWT S2 or C2 cams. As per 'Vinny 10' the 1000hp Z builder (@ Performance Motorsports, NY) , he tells me that they do not work as well as the S1's, if JWT is your thing.

I guess I just got lucky then...

Robert · Tweet this Post! #3 (**permalink**) 12-21-2006, 09:23 PM

Those gains are freaking amazing!!! Congratulations..

GaryGT · Tweet this Post! #4 (**permalink**) 12-22-2006, 03:18 AM

well done mate good power gains