| Tech Support Got a question about a Turbonetics product...here's the place to ask it. |
Can one clock the turbine housing like the compressor one
04-06-2007, 03:41 PM
|
|
Turbonetics Enthusiast
|
|
Join Date: Feb 2007
Location: ON, Canada
Posts: 42
|
|
Can one clock the turbine housing like the compressor one
My unit comes with the oil drain flange facing the head instead of downward...where the 5/8" oil hose is connected to the fitting from the upper oil pan.
The 5/8" oil hose will not clear the exhaust manifold in this orientation 
Please help.
|
04-06-2007, 05:47 PM
|
 |
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Re: Can one clock the turbine housing like the compressor on
Quote:
|
Originally Posted by VLuu
My unit comes with the oil drain flange facing the head instead of downward...where the 5/8" oil hose is connected to the fitting from the upper oil pan.
The 5/8" oil hose will not clear the exhaust manifold in this orientation
Please help. |
Yes you can reclock the turbine housing... loosen the bolts going into it that are mounted into a brass ring type thing on the turbine housing and it should move for you. Remember loosen but don't remove..
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
04-06-2007, 05:58 PM
|
|
Turbonetics Enthusiast
|
|
Join Date: Feb 2007
Location: ON, Canada
Posts: 42
|
|
Re: Can one clock the turbine housing like the compressor on
Quote:
|
Originally Posted by Robert
Quote:
|
Originally Posted by VLuu
My unit comes with the oil drain flange facing the head instead of downward...where the 5/8" oil hose is connected to the fitting from the upper oil pan.
The 5/8" oil hose will not clear the exhaust manifold in this orientation
Please help. |
Yes you can reclock the turbine housing... loosen the bolts going into it that are mounted into a brass ring type thing on the turbine housing and it should move for you. Remember loosen but don't remove.. |
Do you mean to loosen the bolts as in the attached picture? Does the whole thing turn?
|
04-06-2007, 07:55 PM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Re: Can one clock the turbine housing like the compressor on
Quote:
|
Originally Posted by VLuu
Quote:
|
Originally Posted by Robert
Quote:
|
Originally Posted by VLuu
My unit comes with the oil drain flange facing the head instead of downward...where the 5/8" oil hose is connected to the fitting from the upper oil pan.
The 5/8" oil hose will not clear the exhaust manifold in this orientation
Please help. |
Yes you can reclock the turbine housing... loosen the bolts going into it that are mounted into a brass ring type thing on the turbine housing and it should move for you. Remember loosen but don't remove.. |
Do you mean to loosen the bolts as in the attached picture? Does the whole thing turn? |
Yes if you loosen all of the bolts you were pointing to in the picture the entire turbine housing will rotate...
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
04-07-2007, 04:57 AM
|
|
Turbonetics Enthusiast
|
|
Join Date: Feb 2007
Location: ON, Canada
Posts: 42
|
|
Re: Can one clock the turbine housing like the compressor on
Who needs Tech Support from Turbonetics when we have you 
All is good again...I have successfully reclocked the turbine side.
Cheers.
|
04-07-2007, 06:44 AM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Re: Can one clock the turbine housing like the compressor on
Quote:
|
Originally Posted by VLuu
Who needs Tech Support from Turbonetics when we have you
All is good again...I have successfully reclocked the turbine side.
Cheers. |
Awesome glad it worked out!!
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
 |
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -7. The time now is 03:49 PM.
Powered by vBulletin® Version 3.8.2 Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.0
|
