| Tech Support Got a question about a Turbonetics product...here's the place to ask it. |
 |
05-18-2007, 04:21 PM
|
|
Newbie
|
|
Join Date: May 2007
Posts: 1
|
|
Help identifying a turbo
Hey. I'm new to the forum, but I looked around before I posted this and couldn't seem to find the answer. Please go easy on me if it is some place I didn't find.  The serial number on this turbo is T-12608. I'm trying to find out the specs on it. Thanks in advance!
Joe
__________________
Not so SOHC...
|
05-19-2007, 05:28 PM
|
|
Newbie
|
|
Join Date: May 2007
Posts: 5
|
|
yes, myself as well serial # T-12586. i haven't been able to find a resource that helps find the specs by serial #.
aaron
|
05-20-2007, 09:58 PM
|
 |
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Tomorrow morning I'll ask the sales support staff to look up both serial numbers. Give me till tomorrow afternoon guys.
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
05-22-2007, 07:00 PM
|
|
Newbie
|
|
Join Date: May 2007
Posts: 5
|
|
Quote:
|
Originally Posted by Robert
Tomorrow morning I'll ask the sales support staff to look up both serial numbers. Give me till tomorrow afternoon guys.
|
thanks, i appreciate the help!
|
05-25-2007, 06:03 AM
|
|
Newbie
|
|
Join Date: May 2007
Posts: 5
|
|
Quote:
|
Originally Posted by Robert
Tomorrow morning I'll ask the sales support staff to look up both serial numbers. Give me till tomorrow afternoon guys.
|
any updates?
|
05-25-2007, 10:16 AM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Sorry guys but neither of these units are in the build computer. The older Turbonetics units are not in there. Only serial numbers starting with T-2xxxx if you guys pull the covers off the compressor and turbine and measure the inducer and exducer diameters I can most likely tell you what it has..
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
06-09-2007, 12:37 PM
|
|
Newbie
|
|
Join Date: May 2007
Posts: 5
|
|
Quote:
|
Originally Posted by Robert
Sorry guys but neither of these units are in the build computer. The older Turbonetics units are not in there. Only serial numbers starting with T-2xxxx if you guys pull the covers off the compressor and turbine and measure the inducer and exducer diameters I can most likely tell you what it has..
|
haven't measured the turbine, but the compressor outside diameter is 76mm and the inducer diameter is about 56mm but is hard to measure since it has an odd # of fins so you can't measure it straight across accurately. the exhaust housing has a .63a/r stamp inside the flange on the casting. it is a 5 bolt housing with the small hole for an internal wg setup.
|
06-09-2007, 02:35 PM
|
|
Administrator
Turbonetics Owners Club Staff
|
|
Join Date: Jun 2006
Location: Socal
Posts: 4,397
|
|
Quote:
|
Originally Posted by weiRtech
Quote:
|
Originally Posted by Robert
Sorry guys but neither of these units are in the build computer. The older Turbonetics units are not in there. Only serial numbers starting with T-2xxxx if you guys pull the covers off the compressor and turbine and measure the inducer and exducer diameters I can most likely tell you what it has..
|
haven't measured the turbine, but the compressor outside diameter is 76mm and the inducer diameter is about 56mm but is hard to measure since it has an odd # of fins so you can't measure it straight across accurately. the exhaust housing has a .63a/r stamp inside the flange on the casting. it is a 5 bolt housing with the small hole for an internal wg setup. |
Well without an exact measurement it appears the compressor is a T04 either a T04B Super H, Super V or a T04E 50, 54, 57, or 60 trim.
__________________
2004 Nissan Titan SE KC 4X2: AEM Brute Force Intake, NISMO Exhaust, NISMO Shock Kit, PRG Upper Control Arms, PRG Sway Bar Endlinks, PRG LCA Spacers, Eagle Alloy 17x8, Nitto Terra Grappler 295/75/17, Alpine iXA-W404, Apline Power Pack, Apline KCE-400BT, Alpine Imprint, Alpine Type-R Door Speakers, US Amps USA-400, JBL GTO0804
2004 Nissan 350Z: Turbonetics Stage 1 Turbo System, Apexi WS2, HKS LS+ Coilovers with Swift Springs, Hotchkis Sway Bars, NISMO LSD, NISMO Diff Cover, ACT Clutch, JWT Flywheel, GSpec Short Shifter, Hawk HPS pads, Blitz Upper Raditor Hose, Motordyne 5/16" Plenum Spacer, Volk LE37T 19x8.5 and 19x10.5, Blitz FATT DCIII
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -7. The time now is 03:51 PM.
Powered by vBulletin® Version 3.8.2 Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.3.0
|
