[air truck]

Last week I got my turbo back from rebuilding,still black smoke at idle.Then i sent off the pcm to get reflashed,still black smokes.Everybody said that there was an intake leak that's why there was black smoke at idle.I just finished smoking the intake tonight,no leaks.Took it to local turbo shop they said it was a bad reflash.My question is does anybody know of a good tuner in the central florida area.Not sure if i should just take the kit off and junk it,kit ran for 2k miles with no problems until now.Sorry forgot to mention the kit is for the h3 hummer.My snap-on scanner pulled a p0171,p0418,and a p0108.The p0418 is because i took the air pump off.the p0108 is map sensor i tested it, it tested fine.The p0171 is lean in bank 1.how is it lean if i can smell raw fuel in the tail pipe.oh ya since i got the pcm back truck won't hold a charge have to jump it every morning.Turbonetics is no help with this kit,they say I've modified it to work on my truck but they reflashed it twice now hoping it would fix it.so where do i go from here,thanks for any help with my problem greg