[carnot]

I purchased a used mark II that I plan to use on my car. I noticed I am missing some pieces and I was wondering if there is a website selling just these parts as replacements:

1. preload adjustment screw and locking nut
2. upper spring seat (the seat that the preload screw pushes on)

Is there a detailed schematic showing all the internal components (spring seats, nuts, etc.) floating around? Thanks in advance for any help.

[Robert]

Originally Posted by carnot

I purchased a used mark II that I plan to use on my car. I noticed I am missing some pieces and I was wondering if there is a website selling just these parts as replacements:

1. preload adjustment screw and locking nut
2. upper spring seat (the seat that the preload screw pushes on)

Is there a detailed schematic showing all the internal components (spring seats, nuts, etc.) floating around? Thanks in advance for any help.

Pm sent

[mr.griffin]

i ahve the same wastegate mentioned above and am not sure what all need. i need the parts for the top and probably a spring. am i capable of running this wastegate if i only have around 200 hp? thanks

[carnot]

Robert will probably contact you about a contact for replacement parts. Whether you can use this wastegate for a 200 hp motor depends on your setup and what turbo you are using. My gut feeling is that it might be a little too big.

[mr.griffin]

thanks, i got it as a partial trade. if not i will fix it then sell it.

[Robert]

You can use the Delta gate for 200 HP sure. It's really only limited by the top end of the power band. For a Deltagate anything up to about 400 HP is fine. PM sent for parts.